Post by derbyman2012 on Mar 3, 2012 16:08:56 GMT -5
DEMOLITION DERBY
81 SPEEDWAY, PARK CITY KS
Sat Nov 3rd 2012
Gates Open-3P.M DERBY STARTS-7:00 P.M.
$1000.00 AND TROPHY
2ND PLACE - $700.00 AND TROPHY
3rd PLACE - $400.00 AND TROPHY
4th PLACE - $200.00
5TH PLACE - $150.00
6TH PLACE - $ 100.00
7TH PLACE - $50.00
8TH PLACE - $50.00
9TH PLACE - $ 50.00
10TH PLACE - $50.00
11TH PLACE - $50.00
12TH PLACE - $50.00
CARE ENTRY- $10 PIT PASSES - $20
The top 3 cars out of each heat will advance to the final. If less than 12 cars, we will have a 1 heat wonder. We are going to have other races that night just like last year.
NO DRIVERS UNDER 16 YEARS OF AGE. IF UNDER 18, YOU MUST HAVE A SIGNED RELEASE FORM FROM PARENT
IF YOU HAVE ANY QUESTIONS ABOUT THE RULES PLEASE CONTACT
TROY SWONGER @ 620-672-6304
2012 Demolition Derby Rules
1.Any make of automobile, 1950 and up may be entered as long as the vehicle is not a pickup, truck, or jeep. No four wheel drives, NO Chrysler Imperials, NO ambulances or hearses will be allowed. No trucks, jeeps, convertibles, carryalls, and NO Imperial sub frame cars
2.All glass, chrome, name plates, pot metal, plastic, small grill prices, and anything else that might break off or fall off must be removed from car prior to entry on grounds. No wagon decking will be allowed.
3. Concrete, metal plate, wood, foam and pins in the frame and doors will NOT be allowed.
4. The stock gas tanks must be removed. A maximum 10 gallon gas tank must be located in the rear seat compartment and fastened and covered securely.
5. Batteries must be moved to front seat compartment and fastened securely. Batteries and fuel cells must be covered with metal or rubber mat. No more than two automotive or marine batteries allowed.
6. Radiators and fans may be removed but not relocated. You can not use your heater core for a radiator
7. Transmission coolers may be placed inside the car. Electric fans or ice may be used.
8. Body mounts may be changed to 1 inch bolts or less. A 5” by 5” by ¼” plate may be used inside the car as a washer on the top side of the body mounts. You can suck body to frame. Do not weld. You may add 2 extra body mounts inside of car only. Rear humps forward. Not in truck area.
9. Car trunk lids may be folded inside the trunk compartment. You can not weld lid inside of car.
10. Air conditioning condenser cores may be placed in front of the radiator. No other reinforcement such as expanded metal may be used.
11. No tires larger than 15” allowed. A tire mounted inside of a tire is allowable.
12. WHEELS: No bead lock or screwed wheels. 5 lug wheels only
13. Air cleaner must be left in place.
14. Firewalls can have a 12X12 inch hole cut out for distributor clearance. Covered with inter tube. Distributor protectors allowed, must be attached to engine or transmission only, backside must be no wider than 12 inches. If you run a Distributor Protector do not mount your dash bar closer than 6 inches from any sheet metal. You must also cut 5 slices in the firewall so the firewall does not become a support.
15. Modifications are allowed but the car must be running on gasoline.
16. Coil spring rear end cars can NOT be changed to a leaf spring rear end. Do NOT add any leafs to leaf spring car. No main leafs may be substituted for sub leafs. Do not modify or alter suspension of the car, leaf springs must be stock. You may reinforce tie rods with a 3/8 by 8 inch rod, no modification of A arms, leaf springs and coil. This means you can swap out A arm for A arm but you can not reinforce A arm with added metal. No welding is allowed on arms. You may use one 3/8 bolt on each A arm to hold the A arm down. You can have factory twist in spacers in front and rear coils springs. You can have 2 extra clamps per side on rear of leaf springs.
17. You can add 1/8 inch plate or stuff upper and lower control arms.
18. A fire extinguisher must be placed in car and securely mounted within easy access to the driver.
19. You may place slogans and/or advertising (no obscenities) anywhere on the car except on the front door. You must put the car number in large print on the front doors with the driver’s name above the number. You must put car number upright on the roof of the car.
20. All cars must have working brakes.
21. No paint or undercoating allowed on frames.
22. # 9 wire is allowed. 1 spot per window and it can have 2 complete wraps. Can go around frame
23. You can pre-fold body but you can not weld, this means do not create your own seems and weld.
24. 80s and newer –you are allowed to tilt (You are allowed to cut the frame at the box, pull it down, and re-weld it.),
25. Watts-Link Conversions – You may convert a Watts Link Ford to a Standard GM rear end in the following way: Use the trailing arm brackets off an older Ford of the same size and thickness. No positioning of the brackets to strengthen the front down leg of the rear hump. You may cut out the coil spring frame tray from an earlier Ford and weld it in the newer Ford. When welding only one pass ¼”maximum no stronger than stock.
26. 2003 and Newer Fords, Do not change out the aluminum cross member it must remain stock. You can change steering components but they must not weld to the frame. Bolted in with no modifications.
27. Rear ends: You may brace the back housing but can not have axle protectors
DERBY RULES**WELDING EXCEPTIONS
1. The only welding on the frame is from the transmission cross member forward. Top and bottom seams only. Do NOT weld anywhere else on the frame unless stated. Do not X frame. No cars will be allowed to run if they have been welded behind the cross member. You will not be allowed to slobber welds. No welding will be allowed inside of cars. If a car is brought in with welds, you must cut all the way through and no slobbers allowed.
2. The hood must be securely bolted with a maximum of six all threads not to exceed one inch in diameter (must be able to open). The only bolts or all thread allowed to go through the frame are the two located at the radiator core support. All other bolts or all thread must be sheet metal to sheet metal only. Hood washers may not exceed 3/8 inch thick by 5 inch square. Two bolts or all thread (not to exceed 1 inch in diameter) are allowed in the trunk and can go thru frame. Trunk may be chained around rear bumper but must not go around the frame or rear axle. Trunk and doors may be securely welded on the outside only. You can fold top of doors down and weld together. No added material used. You can not weld on hoods; you can use 25 bolts which can be ¼ inch thick to reattach braces to hood.
3. Holes must be cut in hood, (a min. of (2) 6”by 6” each) A 12” hole must be cut in trunk. Trimming the body for tire clearance allowed (a maximum of five 3/8 inch bolts per wheel well with a maximum on inch O.D. washer will be allowed. You may cut and weld rear fender wells also.
4. A safety bar may be welded or bolted behind driver’s seat not to exceed 4 inch in diameter. Bar may extend from door post to door post, but preferred to run diagonally from driver’s door to hump in floor board. A four point internal side cage (includes dash bar, side bars, and bar behind seat) will be allowed. Side bars must not extend further than 18 inches behind rear edge of front door. Side bar can not be bigger than 4 inch. You may also run a kicker from the door bar down to the floor or frame, do not extend any further forward than the front door seam, between the dash bar and seat bar, on both sides. You may connect the rear halo to the frame but can not go further back than 18 inches from the front door seam. Gas tank protectors can be used but can only be only 24 inch long. It can be 3 inch or less in diameter and must be 1 inch away from untouched sheet metal behind gas tank. You can either go forward or angle and tie back into seat bar .
5. Driver’s door must have reinforcement brace on inside or outside of door. Driver’s door bar on the outside can cover driver’s side door and passenger side door but not to exceed past passenger side door. Foam may be place in driver’s door area to protect driver. You may also stick 4x4 wooden post in the driver side door only.
6. DO NOT install special bumpers, extra weights, trailer hitches, special lift kits, or any reinforcement except as set out in rules. No modifications of suspension allowed. Shocks may not be altered but you can have the coil over shocks. No coil over shocks allowed on front end.
7. A bar or chain must be welded in where windshield would be. The windshield protector will not be used for reinforcement.
8. Door seams, trunk lid seams, and wagon gate seams may be welded with 3” by 1/4 “strap or with ½” rebar (in line with the seam). You can not over lay material anywhere on the car. This means do not weld a 2 inch followed by a 1 or even 2 inch. Smaller material may be used. Only outside seams may be welded. You can also weld the inner door seams with a 3” strap. This is the only thing you can weld inside of the car.
9. A maximum of (2) straps 2” by ¼” can be welded from front bumper to core support. A maximum of (2) straps 2” by ¼ can be welded from rear bumper to trunk lid. All straps on the front and back must be placed vertically.
10. Factory bumper mounts may be welded to the frame without using filler material.
11. Shock bumper mounts may be welded without using filler material.
12. Bumper swaps are allowed. Chevy to Ford, Chrysler to Chevy. No relocating of bumpers and No loaded bumpers. You may have (2) 6x3 and ½ inch thick plates laid on the outside of the bumper to help reinforce bumpers. You may put them anywhere on the outside of the bumpers only.
13. Bumper skin may be cut and folded down and welded. Can not relocate cut off bumper scraps.
14. Motor mounts may be welded as long as it does not reinforce frame. You can only go straight down and do not extend out.
15. Pre-run cars may patch a hole in the body of the car, but not replace the whole side of the car. If you patch a hole you must use sheet metal no greater than the sheet metal that makes up the original car body. This patch may overlap the outside of the hole 2”X 4” don’t push your luck
16. No welding of the suspension. You can weld main leaf mounting brackets to prevent them from coming unbolted. Rear end control arm may be shortened or lengthened but must be rewelded. You can weld coil springs at the base. (So they don’t fly out)
17. The steering column from steering wheel to gearbox may be altered.
18. Welding machines can be allowed in pit area.
19. All cars may have plates welded to the frame and you may have 6 total plates (4X6) and can be ¼ inch thick. Maximum 6 plates per car. This means fresh or used cars. If you have a preran car, and you already have 6 plates and you have to add another plate, you must completely cut one plate off to add another plate. The plates can only be welded on the side of the frames. No welding the plates on the top and bottom of the frame. ONLY 6 plates total and I am not going off square inches.
21. You may weld the core support and inner fenders to outer fenders. DO NOT USE ADDED FILLER. WELD ONLY.
22. Sedagons are allowed but you are not allowed to weld the top post to the bottom post. You can only tuck roof inside of car and use the 2 all threads or # 9 wire which is stated.
DERBY RULES
1.One driver door hit is a warning unless it is intentional. 2ND door hit and you are out.
2. If you are pushed into a driver door or are on the brakes and he door contact is a soft bump, you will be allowed to continue.
3. Anytime 2 wheels or more of the car is outside of the boundary the car will have one minute to return. Four wheels out and car is disqualified from heat.
4. Any car with gasoline spilling or leaking will be disqualified from heat.
1. Drivers must remain in their cars until the event director has declared the heat is over, except in the case of a fire.
2. When the calling goes out for each heat and final heat, driver is responsible for being on the track in 2 minutes or he will be disqualified.
3. Helmets with face shields or helmets with goggles must be worn at all times. Seat belts and shoulder harness must be worn at all times.
4. Any door that comes open will be disqualified.
5. Driver must make a hit within 1 minute
6. Cars catches on fire two times in one heat will be disqualified from heat.
81 SPEEDWAY, PARK CITY KS
Sat Nov 3rd 2012
Gates Open-3P.M DERBY STARTS-7:00 P.M.
$1000.00 AND TROPHY
2ND PLACE - $700.00 AND TROPHY
3rd PLACE - $400.00 AND TROPHY
4th PLACE - $200.00
5TH PLACE - $150.00
6TH PLACE - $ 100.00
7TH PLACE - $50.00
8TH PLACE - $50.00
9TH PLACE - $ 50.00
10TH PLACE - $50.00
11TH PLACE - $50.00
12TH PLACE - $50.00
CARE ENTRY- $10 PIT PASSES - $20
The top 3 cars out of each heat will advance to the final. If less than 12 cars, we will have a 1 heat wonder. We are going to have other races that night just like last year.
NO DRIVERS UNDER 16 YEARS OF AGE. IF UNDER 18, YOU MUST HAVE A SIGNED RELEASE FORM FROM PARENT
IF YOU HAVE ANY QUESTIONS ABOUT THE RULES PLEASE CONTACT
TROY SWONGER @ 620-672-6304
2012 Demolition Derby Rules
1.Any make of automobile, 1950 and up may be entered as long as the vehicle is not a pickup, truck, or jeep. No four wheel drives, NO Chrysler Imperials, NO ambulances or hearses will be allowed. No trucks, jeeps, convertibles, carryalls, and NO Imperial sub frame cars
2.All glass, chrome, name plates, pot metal, plastic, small grill prices, and anything else that might break off or fall off must be removed from car prior to entry on grounds. No wagon decking will be allowed.
3. Concrete, metal plate, wood, foam and pins in the frame and doors will NOT be allowed.
4. The stock gas tanks must be removed. A maximum 10 gallon gas tank must be located in the rear seat compartment and fastened and covered securely.
5. Batteries must be moved to front seat compartment and fastened securely. Batteries and fuel cells must be covered with metal or rubber mat. No more than two automotive or marine batteries allowed.
6. Radiators and fans may be removed but not relocated. You can not use your heater core for a radiator
7. Transmission coolers may be placed inside the car. Electric fans or ice may be used.
8. Body mounts may be changed to 1 inch bolts or less. A 5” by 5” by ¼” plate may be used inside the car as a washer on the top side of the body mounts. You can suck body to frame. Do not weld. You may add 2 extra body mounts inside of car only. Rear humps forward. Not in truck area.
9. Car trunk lids may be folded inside the trunk compartment. You can not weld lid inside of car.
10. Air conditioning condenser cores may be placed in front of the radiator. No other reinforcement such as expanded metal may be used.
11. No tires larger than 15” allowed. A tire mounted inside of a tire is allowable.
12. WHEELS: No bead lock or screwed wheels. 5 lug wheels only
13. Air cleaner must be left in place.
14. Firewalls can have a 12X12 inch hole cut out for distributor clearance. Covered with inter tube. Distributor protectors allowed, must be attached to engine or transmission only, backside must be no wider than 12 inches. If you run a Distributor Protector do not mount your dash bar closer than 6 inches from any sheet metal. You must also cut 5 slices in the firewall so the firewall does not become a support.
15. Modifications are allowed but the car must be running on gasoline.
16. Coil spring rear end cars can NOT be changed to a leaf spring rear end. Do NOT add any leafs to leaf spring car. No main leafs may be substituted for sub leafs. Do not modify or alter suspension of the car, leaf springs must be stock. You may reinforce tie rods with a 3/8 by 8 inch rod, no modification of A arms, leaf springs and coil. This means you can swap out A arm for A arm but you can not reinforce A arm with added metal. No welding is allowed on arms. You may use one 3/8 bolt on each A arm to hold the A arm down. You can have factory twist in spacers in front and rear coils springs. You can have 2 extra clamps per side on rear of leaf springs.
17. You can add 1/8 inch plate or stuff upper and lower control arms.
18. A fire extinguisher must be placed in car and securely mounted within easy access to the driver.
19. You may place slogans and/or advertising (no obscenities) anywhere on the car except on the front door. You must put the car number in large print on the front doors with the driver’s name above the number. You must put car number upright on the roof of the car.
20. All cars must have working brakes.
21. No paint or undercoating allowed on frames.
22. # 9 wire is allowed. 1 spot per window and it can have 2 complete wraps. Can go around frame
23. You can pre-fold body but you can not weld, this means do not create your own seems and weld.
24. 80s and newer –you are allowed to tilt (You are allowed to cut the frame at the box, pull it down, and re-weld it.),
25. Watts-Link Conversions – You may convert a Watts Link Ford to a Standard GM rear end in the following way: Use the trailing arm brackets off an older Ford of the same size and thickness. No positioning of the brackets to strengthen the front down leg of the rear hump. You may cut out the coil spring frame tray from an earlier Ford and weld it in the newer Ford. When welding only one pass ¼”maximum no stronger than stock.
26. 2003 and Newer Fords, Do not change out the aluminum cross member it must remain stock. You can change steering components but they must not weld to the frame. Bolted in with no modifications.
27. Rear ends: You may brace the back housing but can not have axle protectors
DERBY RULES**WELDING EXCEPTIONS
1. The only welding on the frame is from the transmission cross member forward. Top and bottom seams only. Do NOT weld anywhere else on the frame unless stated. Do not X frame. No cars will be allowed to run if they have been welded behind the cross member. You will not be allowed to slobber welds. No welding will be allowed inside of cars. If a car is brought in with welds, you must cut all the way through and no slobbers allowed.
2. The hood must be securely bolted with a maximum of six all threads not to exceed one inch in diameter (must be able to open). The only bolts or all thread allowed to go through the frame are the two located at the radiator core support. All other bolts or all thread must be sheet metal to sheet metal only. Hood washers may not exceed 3/8 inch thick by 5 inch square. Two bolts or all thread (not to exceed 1 inch in diameter) are allowed in the trunk and can go thru frame. Trunk may be chained around rear bumper but must not go around the frame or rear axle. Trunk and doors may be securely welded on the outside only. You can fold top of doors down and weld together. No added material used. You can not weld on hoods; you can use 25 bolts which can be ¼ inch thick to reattach braces to hood.
3. Holes must be cut in hood, (a min. of (2) 6”by 6” each) A 12” hole must be cut in trunk. Trimming the body for tire clearance allowed (a maximum of five 3/8 inch bolts per wheel well with a maximum on inch O.D. washer will be allowed. You may cut and weld rear fender wells also.
4. A safety bar may be welded or bolted behind driver’s seat not to exceed 4 inch in diameter. Bar may extend from door post to door post, but preferred to run diagonally from driver’s door to hump in floor board. A four point internal side cage (includes dash bar, side bars, and bar behind seat) will be allowed. Side bars must not extend further than 18 inches behind rear edge of front door. Side bar can not be bigger than 4 inch. You may also run a kicker from the door bar down to the floor or frame, do not extend any further forward than the front door seam, between the dash bar and seat bar, on both sides. You may connect the rear halo to the frame but can not go further back than 18 inches from the front door seam. Gas tank protectors can be used but can only be only 24 inch long. It can be 3 inch or less in diameter and must be 1 inch away from untouched sheet metal behind gas tank. You can either go forward or angle and tie back into seat bar .
5. Driver’s door must have reinforcement brace on inside or outside of door. Driver’s door bar on the outside can cover driver’s side door and passenger side door but not to exceed past passenger side door. Foam may be place in driver’s door area to protect driver. You may also stick 4x4 wooden post in the driver side door only.
6. DO NOT install special bumpers, extra weights, trailer hitches, special lift kits, or any reinforcement except as set out in rules. No modifications of suspension allowed. Shocks may not be altered but you can have the coil over shocks. No coil over shocks allowed on front end.
7. A bar or chain must be welded in where windshield would be. The windshield protector will not be used for reinforcement.
8. Door seams, trunk lid seams, and wagon gate seams may be welded with 3” by 1/4 “strap or with ½” rebar (in line with the seam). You can not over lay material anywhere on the car. This means do not weld a 2 inch followed by a 1 or even 2 inch. Smaller material may be used. Only outside seams may be welded. You can also weld the inner door seams with a 3” strap. This is the only thing you can weld inside of the car.
9. A maximum of (2) straps 2” by ¼” can be welded from front bumper to core support. A maximum of (2) straps 2” by ¼ can be welded from rear bumper to trunk lid. All straps on the front and back must be placed vertically.
10. Factory bumper mounts may be welded to the frame without using filler material.
11. Shock bumper mounts may be welded without using filler material.
12. Bumper swaps are allowed. Chevy to Ford, Chrysler to Chevy. No relocating of bumpers and No loaded bumpers. You may have (2) 6x3 and ½ inch thick plates laid on the outside of the bumper to help reinforce bumpers. You may put them anywhere on the outside of the bumpers only.
13. Bumper skin may be cut and folded down and welded. Can not relocate cut off bumper scraps.
14. Motor mounts may be welded as long as it does not reinforce frame. You can only go straight down and do not extend out.
15. Pre-run cars may patch a hole in the body of the car, but not replace the whole side of the car. If you patch a hole you must use sheet metal no greater than the sheet metal that makes up the original car body. This patch may overlap the outside of the hole 2”X 4” don’t push your luck
16. No welding of the suspension. You can weld main leaf mounting brackets to prevent them from coming unbolted. Rear end control arm may be shortened or lengthened but must be rewelded. You can weld coil springs at the base. (So they don’t fly out)
17. The steering column from steering wheel to gearbox may be altered.
18. Welding machines can be allowed in pit area.
19. All cars may have plates welded to the frame and you may have 6 total plates (4X6) and can be ¼ inch thick. Maximum 6 plates per car. This means fresh or used cars. If you have a preran car, and you already have 6 plates and you have to add another plate, you must completely cut one plate off to add another plate. The plates can only be welded on the side of the frames. No welding the plates on the top and bottom of the frame. ONLY 6 plates total and I am not going off square inches.
21. You may weld the core support and inner fenders to outer fenders. DO NOT USE ADDED FILLER. WELD ONLY.
22. Sedagons are allowed but you are not allowed to weld the top post to the bottom post. You can only tuck roof inside of car and use the 2 all threads or # 9 wire which is stated.
DERBY RULES
1.One driver door hit is a warning unless it is intentional. 2ND door hit and you are out.
2. If you are pushed into a driver door or are on the brakes and he door contact is a soft bump, you will be allowed to continue.
3. Anytime 2 wheels or more of the car is outside of the boundary the car will have one minute to return. Four wheels out and car is disqualified from heat.
4. Any car with gasoline spilling or leaking will be disqualified from heat.
1. Drivers must remain in their cars until the event director has declared the heat is over, except in the case of a fire.
2. When the calling goes out for each heat and final heat, driver is responsible for being on the track in 2 minutes or he will be disqualified.
3. Helmets with face shields or helmets with goggles must be worn at all times. Seat belts and shoulder harness must be worn at all times.
4. Any door that comes open will be disqualified.
5. Driver must make a hit within 1 minute
6. Cars catches on fire two times in one heat will be disqualified from heat.