|
Post by thehorn28 on Sept 13, 2012 7:33:16 GMT -5
There will be a clean up derby in Clay Center Ks On 10/20/12. Start time 7 pm. This will be a patch and repair kind of show. No Imps. Fresh cars will build to the normal rules. (will get them posted) No stuffed frames. Only Repairs. Full size and Compacts. Prize money will be 700 for 1st and rest prorated on car count and general admission money. More to info to come ?s call Leon at 785-541-0390 Read more: we-crash.proboards.com/index.cgi?board=midwest&action=display&thread=22416#ixzz26LtwnLq8
|
|
|
Post by thehorn28 on Sept 25, 2012 8:10:47 GMT -5
New car Rules Are... If car does not pass inspection or driver is unwilling to change car to pass inspection - absolutely no refunds!! 1. All rules will be followed, or you will not run!! 2 No Imperials 4x4’s, ambulances, hearses, trucks, limousines, etc… 3. Drivers must be 18 years of age and have a valid driver’s license. Ages 14 –17 must have a notarized permission slip and some form of driver’s license. The person that signs in as the driver must be the driver for that event! 4. Driver must wear seat belt and helmet, along with eye protection. 5. ALL drivers must attend the drivers meeting. 6. DO NOT hit the driver’s door! Sometimes this happens, but if it looks intentional or carelessness, you will be disqualified. Don’t use your door as a shield; it may cause you to get disqualified. 7. No hot rodding in the pits, keep it at an idle. 8. Any open driver’s door or fire will cause disqualification. If in heat, you may fix it and come back in the consolation. 9. NO sandbagging or holding!!! You will be disqualified! You are given 20 seconds for aggressive hits, 1 minute for restarts and 1 minute if you are hung up. 10. No alcohol in the pits, if anyone is caught with alcohol, they will be disqualified, this includes their pit crew. 11. Cars are subject to re-inspection before any prize money is handed out. 12. Any controversies will be taken up at the drivers meeting. 13. Any questions give us a call! If it doesn’t say you can do it, don’t do it. Call 1st!! Judges decisions are FINAL!!! Car Preparation 1. All cars must be stock, unless modification is stated in the rules. 2. All glass, plastic, chrome, and interior must be removed from car before arriving to the derby. 3. All decking in station wagons MUST be removed!!! 4. Tires no bigger than 15 inch, No split rims, No studded tires. Foam filled or Doubled tires OK-we don’t want any flats!!! Valve stem protectors OK. Tires may be screwed to rims. 5. Driver must have a fire coat or non-flammable jacket to wear while driving in event. 6. Driver must have safety approved glasses or face shield. Driver needs to have FULL faced helmets. 7. You must use a radiator and it must be in stock location. All cars must have working brakes. 9. A-arms, ball joints remain stock. 10. All trailer hitches and braces must be removed. 11. Original gas tanks must be removed. You must use a boat tank or well made fuel cell and it must be properly secured and covered. No gas cans. Plastic gas tanks must be placed in a metal box!! Fuel line must be secured and fastened properly. Keep away from exhaust. Place fuel cell behind driver’s seat or in the center of the car where the back seat, use to be. Compacts read additional rules on back! SUSPENSION: 11. Suspension must be at stock height. Leaf springs must be stock, you may add one spring as long as the main leaf spring, you can't wrap the added leaf spring to make a double main - tow packages OK. The Main leaf spring must be the top spring in the spring pack and leaf springs must stagger down with at least a 2 inch stagger from longest to smallest. You can re-clamp springs, 6 clamps per side homemade or factory. Homemade clamps can’t exceed 2x4x1/4 inch. You can put spacers in sagging coil springs to get your height. You can bolt or wire coil springs to rear-end and frame to prevent springs from falling out. You may weld leaf spring mounting brackets to prevent them from becoming unbolted. You can loop chain or wire from rear end to frame in 1 spots on each side. No bigger than #9 wire or 1/2” chain or cable may be used. 12. Mopars can weld mounting brackets to uni-body where leaf springs are mounted factory to uni-body frame. Include rear shackle box. 13. Rear-end control arms may be reinforced, but must be workable. They may be shortened or made longer as well. No Homemade!! 14. Use rear end of choice, must be factory 5 lugs. You can tilt rear end if you wish. Welded or posi-track highly recommended 15. Rear-end Housings may be re-enforced. Hybrid rear-ends are allowed 16. Front arms may be bolted or chained down to get your bumper height. ENGINE MOUNTING: 17. Engine mounts may be welded to engine cradle. Engine must be mounted in stock location. 18. Use motor and tranny of choice, motor must be in stock location. You may chain or weld motor and tranny to keep in place (don’t strengthen the frame). 19. You may have a 2-2” strap from the motor head to frame on top side of frame next to A-arm on front side of motor and can be welded with no added metal! You will be allowed 2- 2” straps on the rear of the motor connected from the motor heads to the Frame, but must be on the top side of frame within 3 inches of the back side of A-arms. If this is used to re-enforce frame, straps will be cut! STEERING: 20. Tie-rods ends must be stock, but the center can be re-enforced, A-arms, ball joints and all other steering/suspension must remain stock. You may alter your steering column to prevent loss of steering. Steering knuckles, homemade steering shafts, etc. FENDERS: 21. You may cut wheel wells for tire clearance & you may weld fender over tire back together. Fenders may also be bolted together with 5-3/8” bolts or each. The rear quarter panel is considered part of the rear fender. MISC: 22. For safety, you are allowed 1 strap in each door window opening straps can be 2” wide – ¼” thick and can be welded 5” on the door & 5” on the roof – you may not use wire if you use straps ** Hardtop cars may have another strap at the door post. You must have 2 bars in windshield from roof to dash for safety reasons. 23. You can run shifter through floor and you can have a switch panel. You may also have a hand throttle. If you are running an electric fuel pump – must be hooked up to your ignition switch – so when your car shuts off – it shuts off. 24. You are allowed 2 spots with 4 loops of wire (no cable or chain) in each window opening and may go to the frame. No welding washers around holes on car body. 25. You may run wire from frame rail to frame rail underneath back of car, behind rear-end with 4 loops of wire or 1 loop of 3/8 chain/cable in 1 spot only. This must go around the frame; this can not be bolted to the frame. 26. You are allowed to weld Factory body seams weld 6 skip 6. Body seams only NOT FRAME!!!!!!!
27. Dist. Cap Protector allowed. The protector must be mounted to engine heads and intake only. There must be 12 inches of clearance between the Dist. Cap protector and the dash bar at the start of the event. Dist. Cap protector can't be mounted to body, frame or cage. Dist. Cap Protector or firewall sheet metal. RUST REPAIR & FRAME REPAIR: 28. You may repair rusted out sheet metal with sheet metal only. Leave the rust in place and repair over it. Rusted out frames may be repaired with 1/8 inch or less. You are allowed to weld the patch 2 inches past the rusted out area, leave the rust in place. 29. Bent frames my be repaired with 1/8 inch metal 2 inches past the bend, but only on 1 side of the frame. The patch may be welded solid, but you must have a 1/2 inch hole in the patch. You can only repair the frame once in each place. No re-patching or layering of patches. 30. No fresh undercoating in frames. We have the right to make you burn it off. COMPACT CLASS: In addition to the above rules- 4 & 6 Cylinders only. 1. Any-Front wheel driver compact car with 108” or less wheel base but rear wheel driver cars must have a 106” or less wheel base. 2. If the stock gas tank is located under the car but in front of rear axle, the stock gas tank may be used. Any questions call Leon 785 541 0390
|
|
|
Post by twatson31 on Nov 20, 2012 19:41:56 GMT -5
Do we have the results of.thia by chance?
|
|